Monitoring
When the Power goes out it is critical your generator works!
During a power outage, it’s vital that your emergency power system works every time! Remotely monitoring a standby generator helps to make sure that the emergency power system is ready for the next power failure. If a problem occurs, we will alert you immediately to provide a fast, proactive service response.
Our monitoring is a perfect choice for almost all standby generator applications, very affordable and universal for all generators.
We monitor and log the following standard conditions:
We can also customize your monitoring needs to include:
- Common Fault
- Common Warning/Pre-Alarms
- Low Fuel Level
- Generator Switch Not in Auto
- Low Coolant Temperature
- Low Coolant Level
- High Engine Temperature
- Low Oil Pressure
- Over Speed
- Over Crank
- Fuel Leak Detected
- All inputs can be custom configured
Additional monitoring capabilities available:
- Utility Power On/Off
- On Generator Power
- Return to Utility Power
- Generator Breaker Open
Optional Fuel Polishing - Automated:
- Monitored Daily
- Automatically Cleans the Fuel Monthly
- Cost-Effective Compared to Manual Cleaning
- Cleaner Fuel = Better Performance
Optional Yearly Maintenance Plan:
- GS Technicians are highly trained in all aspects of power generation
- Service
- Fuel Polishing
Optional Emergency Response Plan and Teams:
- GS will design your emergency response plan
- Deploy Technicians in emergency events
- GS’s experience includes completing more than 2,800 generator services in a one month period during a recent storm response!
GS300
The GS300 generator monitoring system is a full-featured solution for any residential, commercial, or industrial outdoor standby generator. This monitor includes a custom harness, has four (4) additional programmable bias inputs and one (1) ADC input. The GS300 digital inputs are used with generator controller outputs and accessory kits. When configured with the appropriate accessory kits, the GS300 can log the full sequence of operation of the emergency power system.
Description:
- GS300 Monitor – Fully Configured & Scripted
- Internal Cellular & GPS Antenna
- Custom Connection Harness
- 4 Digital Inputs
- 1 ADC Input
- 3 Relay Driver Outputs
- 12-24VDC Power
- Internal 1000mAh Lithium-Ion Battery
- Cellular Carrier Activation with Verizon or AT&T
GS400
The GS400 monitoring system is a comprehensive solution for monitoring all of the major alarm points for any indoor or outdoor standby generator application. This system can log the full sequence of operation of the emergency power system. Digital inputs are used with generator controller outputs and accessory kits. When configured with the appropriate accessory kits, the GS400 can log the full sequence of operation of the emergency power system.
Description:
- GS400 Monitor – Fully Configured & Scripted
- External Cellular & GPS Antenna – Magnetic Mount
- Power Harness and Custom I/O Connection Harness
- 7 Digital Inputs
- 4 ADC Inputs
- 5 Relay Driver Outputs
- 12-24VDC Power
- Internal 1000mAh Lithium Ion Battery
- Cellular Carrier Activation with Verizon or AT&T
GS500
The GS500 generator monitoring system is a comprehensive solution for monitoring all the major alarm points for any indoor or outdoor standby generator application. The GS500 has included three different connection modes including Ethernet, WiFi, and Cellular. The GS500 digital inputs are used with generator controller outputs and accessory kits. When configured with the appropriate accessory kits, the GS500 can log the full sequence of operation of the emergency power system.
Description:
- GS500 Monitor – Fully Configured & Scripted
- 4G LTE Cellular Connectivity
- Two (2) RJ45 Ethernet Ports
- Optional WiFi Antenna and Dedicated Access Point
- External Cellular & GPS Antenna
- Power Harness and Custom I/O Connection Harness
- Internal 1Ah Lithium Ion Backup Battery
- 7 Digital Inputs
- 3 ADC Inputs
- 5 Relay Driver Outputs
- 7-32VDC Power
- Cellular Carrier Activation
- Over-The-Air Unit Configuration and Updates
- Generator On (Running)/Off (Stopped)
- Engine Battery Voltage Monitor with Low Battery Alarm
- Generator Failed to Exercise (Missed Exercise Cycle)
- Extended Run Time Alerts – Generator Running for 4, 8, 12 & 24 Hours
- Remote Start Relay Driver Output (Customer Furnished Relay)
FAQs
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.
gEncompass is a mobile application/software that you use to create digital forms. You can then fill the forms out on your phone, tablet, or computer.
Yes, you can send people even outside our software a link to fill out any form.
Our email connector allows forms to be sent to whoever needs to see them, as long as they have an email. The data can be sent instantly, delayed, or with conditions.
Fill out your information on the Contact Us page and send us a message! A gEncompass representative will be in touch within 24 hours.
